Libya - Supporting electricity sector reform : task D strategic plan for renewable energy development - feasibility study for a PV plant at Jadu site (Anglais)

The feasibility study in hand is part of a larger set of tasks to analyse the Libyan market for the implementation of utility scale renewable energy producers into the national grid system. Under this general task of analyzing the current status of the...  Voir la suite The feasibility study in hand is part of a larger set of tasks to analyse the Libyan market for the implementation of utility scale renewable energy producers into the national grid system. Under this general task of analyzing the current status of the system and the developments needed to allow for private sector participation, the study in hand shall develop one concrete opportunity to install an RE plant to deliver electrical energy into the national grid. The feasibility study describes this approach. In the course of this analysis, a number of extensive documents have been prepared and are partly forming the basis of single steps for the feasibility analyses. Further on, additional detailed documents have been prepared to either develop or justify the work. As the study itself shall be very clear and easy to read, such documents have been attached as annexes and the result or output has been taken into the core document. Generally, the sense of the feasibility analysis is to identify one concrete location and one concrete technology to install there. section three will review the nominated site and name the conditions around. The analysis is based on an extensive review of a number of sites. Section four will reflect a detailed analysis if the resource data on site. This is based on on-site measurements taken in the closer vicinity. An extensive report on the resource evaluation will pick up the details. To describe the technology options section five picks up different set-ups for the general layout of the plant on the selected site. Here, the Consultant describes different products which might be installed and explains his path through these opportunities. Following this, the configuration of options form plant concepts is defined, leading to a number of possible layouts. Calculating an LCOE for these configuration leads to a table with plant concepts. A ranking of these concepts, based on LCOE and further facts for the technologies, allows to define a recommended case. This recommended case is presented in section six. It forms the basis for the further review and calculation. An environmental screening has been performed and the results are shown in section seven. In the document the main outcome for the specific site is displayed. Boundary conditions are displayed in Annex 6.Wrapping up all information collected and calculated up to here allows for an economic and financial analysis. Section eight summarizes the financing conditions and shows the results. Finally, section nine summarizes the conclusions and underlines the main findings.  Réduire